Provi Porcelain
From £42.00 / M2
(Sold per box and has a minimum quantity of 6 boxes)
0 Boxes
(Total coverage: 0 sqm)Select Sample Size
*ORDER up to 4 small samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
NEW PRODUCT NOW AVAILABLE FROM STOCK - AVAILABLE IN TWO GORGEOUS COLOURS
Abundant in light and grace, and so bringing illumination into even the darkest rooms and corners, this is a stunning stone effect porcelain tile with dappled ivory (Tarascon) or sandy (St Remy) tones. Warm, neutral and reminiscent of bridal elegance, this is a fluid floor tile that is heightened by its aged finish, inherent in the natural stone these porcelain tiles are based on. Especially pretty when paired with snowy white or rich cream walls, inject warmth and colour with textured soft-furnishings or go for drama with a monochrome pallet and mirrored accessories. And why not add leather furniture in chocolate tones? When it comes to décor the scope is endless – be sure to stamp your own personality on these beautiful stoneware tiles and rest assured, being porcelain, our Provi Porcelain will excel in high-traffic areas too. Sold in 90cm x 60cm tile size.
PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order of 6boxes (9.72sqm) on this stoneware porcelain. Popular grout colours are listed under the specification tab along with further information on these aged stone effect porcelain tiles.
LARGE SIZE SAMPLE INFORMATION: A single 30cm x 30cm sample is available to purchase at £5inc P&P. Please detail colour required in the 'ADD COMMENTS TO YOUR ORDER' field at check-out. This £5 will be credited against any future order of Provi Porcelain.
Product Details | |
Box Size | 3tiles / 1.62sqm |
Box Weight | 33.4kg |
Boxes Per Pallet | 28boxes (45.6sqm) per pallet - based on network palletways delivery | 32boxes (51.84sqm) per pallet - based on hi-ab delivery (extra costs may apply). Please call us on 01285 885795 for confirmation of delivery costs. |
Technical | |
Grade | Wall & Floor R10 - Residential interior walls & floors | Commercial interior walls & floors |
Indoor Installation Points | Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout (we offer Rocatex Ultimate & Ardex FS grout). For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond. |
Blending | Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended. |
Accessories | |
Popular Grout Colours | TARASCO: Silver Shimmer FS - Dove Grey FS - Fresh Snowdrop FS | ST REMY: Natural Almond FS - Classic Vanilla FS |
Recommended Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc |
Recommended Adhesive | EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane. |