Your shopping cart is empty!
Product Code: P/ZONBWX
Availability: Pre-Order
Zone External Porcelain
Zone External Porcelain
From £70.80 / M2
(Sold per box and has a minimum quantity of 30 boxes)
0 Boxes
(Total coverage: 0 sqm)
£70.80 /boxesinc VAT
Select Sample Size
*ORDER up to 4 small samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
20mm EXTERNAL PORCELAIN: available to pre-order in GREY or ZINC. Tile size is 90cm x 90cm. Lead time is approximately 5weeks from order*.
**GREY NOW AVAILABLE FROM STOCK - MOQ OF 10 BOXES / 8.1sqm**
Zone external porcelain is a fusion of cement finish floors & natural stone producing a wonderful contemporary stone effect porcelain. At 20mm thick, this dedicated external Italian made porcelain is available in the uber modern large square size of 90cm x 90cm - this full compliments the internal 90cm x 90cm available in the indoor Zone porcelain range. Alternatively the external 90cm x 90cm can be paired with the 120cm x 60cm internal tile to create that smooth aesthetic flow from indoors to out but with the added visual interest of a format change. Zone Grey exudes industrial chic & charm, a pale blue-grey colour, the subtle motted surface adds an almost limestone characteristic to this slab. Zone Zinc is a fabulous dark grey tile and would look magnificent against red-brick.
We operate a minimum order quantity of 30boxes (24.3sqm) on this contemporary stone look exterior porcelain tile. For popular grout colours and further information on this cement / stone effect external porcelain please refer to the specification tab.
*LEAD TIME: this is an estimate only and is based on the supplier having stock available. Please call us now on 01285 885795 to confirm availability and lead time.
PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison.
| Product Details | |
| Box Size | 1 tile / 0.81sqm per box |
| Box Weight | 36.7kg per box |
| Boxes Per Pallet | 25boxes (20.25sqm) per pallet - based on network palletways delivery 30boxes (24.3sqm) per pallet - based on hi-ab delivery (extra costs may apply) Please call us on 01285 885795 for confirmation of delivery costs. |
| Technical | |
| Grade | Outdoor / Rectified - R11 - Residential exterior | Commercial interior & exterior |
| External Installation Points | External formats are 20mm thick so can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self levelling pedestals. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR & SBR mixed with powdered to cement to form a bonding slurry used to prime the backs of the impervious tiles to provide a key for bonding. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used. Tiles can either be grouted with a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout), or finished with a brush-in resin compound or alternative jointing method. |
| Blending | Shade and colour variation should be expected in our ‘natural’ look porcelain products. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. A good number of packs should be opened at a time and blended. |
| Accessories | |
| Popular Grout Colours | GREY: Ardex FL Silver Shimmer - Dove Grey - Rocatex Ultimate Cement Grey - Light Grey | ZINC: Rocatex Ultimate Cement Grey - Anthracite - Ardex FL Silver Shimmer - Cast Iron |
| Recommended Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts |
| Recommended Adhesive | Single Part Rapid Set S1 Flexible Grey Adhesive 20kg - when installing on a solid concrete/cement/screed base. |
