Lodge Avorio Timber Porcelain
From £30.00 / M2
(Sold per box and has a minimum quantity of 6 boxes)
0 Boxes
(Total coverage: 0 sqm)Select Sample Size
*ORDER up to 4 small samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
NOW ON CLEARANCE SALE AT JUST £25sqm+VAT & DELIVERY (reduced from £32sqm)
Lodge Avorio is a spectacular timber look tile made from hard-wearing, stain resistant porcelain. A brilliantly versatile plank size of 120cm x 20cm replicates the width of real wide oak floors but it in a shorter length making it eminently suitable for bathrooms floors and half-height wall panelling. You can even tile this beautiful light oak pale porcelain in dynamic herringbone pattern to create a visually stunning floor. With all the real timber characteristics such as grain marking and knots, Lodge Avorio gives you the stylish look of a pale oak floor but in an easy clean, low maintenance tile.
Lodge Avorio is based on pale limed oak but with a hint of grey making it a superb contemporary choice in any room from sanctuary bathrooms to busy living spaces. At just £25sqmVAT and delivery, this is a fantastically economical solution too. Perfect for updating tired bathrooms or adding a dash of panache to that get away cottage by the sea.
PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order of 6 boxes (8.46sqm) on this product. Each box contains 6 tiles equalling 1.41sqm. For popular grout colours and further information on this timber look porcelain please refer to the specification tab.
LARGE SIZE SAMPLE INFORMATION: A single 30cm x 20cm sample is available to purchase at £5inc P&P. This £5 will be credited against any future order of Lodge Avorio Porcelain.
KERBSIDE DELIVERY IMPORTANT INFORMATION (PDF)
Product Details | |
Box Size | 6 tiles (1.41sqm) per box |
Box Weight | 30.5kg per box |
Boxes Per Pallet | 30boxes / 42.3sqm per pallet |
Technical | |
Grade | Wall & Floor R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors |
Installation Points | Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. |
Blending | Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended. |
Accessories | |
Popular Grout Colours | Ardex FS Fresh Snowdrop - Classic Vanilla - Dove Grey | Rocatex Ultimate Limestone - Silver Grey |
Recommended Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc |
Recommended Adhesive | EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane. |