Your shopping cart is empty!
Product Code: P/REBSEM
Availability: In Stock
Metallike Emerald Porcelain
Metallike Emerald Porcelain
From £46.80 / M2
(Sold per box and has a minimum quantity of 7 boxes)
0 Boxes
(Total coverage: 0 sqm)
£54.00
£67.39 /boxesinc VAT
Select Sample Size
*ORDER up to 4 small samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
120cm x 120cm SIZE AVAILABLE TO PRE-ORDER, APPROX. LEAD TIME OF 4WEEKS AND NOW ON SALE AT £49sqm+VAT
120cm x 60cm USUALLY AVAILABLE FROM STOCK
This stunning Emerald tile from our Industrial Metallike porcelain collection is based on copper Verdigris, a beautiful green colour that occurs naturally on time weathered copper. Everything about our Metallike range is fantastic: great colours, two big tile sizes and fantastic prices with the large 120cm x 60cm slab at just £39sqm+VAT and delivery! Emerald Metallike mimics all the patina, translucent effects and colour contrasts that are very often seen on old metal cladding on agricultural and industrial buildings. At just 9mm thick, the superb large slab sizes look amazing on walls and well as floors, Indeed the 120cm x 60cm Emerald tile looks simply stunning vertically stacked – this is where the tiles are laid portrait style one on top of the other. Both tiles sizes of course can be used to create absolutely stunning bathrooms though we do think, in this case, that big is certainly better! Go full wall height with the magnificent 120cm x 120cm slab, easy to install and a lot less grout to keep clean! Emerald looks great with a dark charcoal grout which gives a shadow-gap look enhancing the design even further.
We operate a minimum order of 7boxes on this product. 7boxes of 120x60 is 10.08sqm and 7boxes of 120x120 is 20.16sqm.
PRICES EXCLUDE DELIVERY and the price per sqm is also shown allowing easy comparison. Box sizes are listed under the specification tab along with further information on this stone look porcelain floor.
NB: Due to the oversized nature of the 120cm x 120cm tiles a delivery surcharge applies as the pallet/s take up more than a single allotted space on the delivery network. This charge is shown clearly before checkout.
LARGE SIZE SAMPLE INFORMATION: A single 30cm x 30cm sample is available to purchase at £5inc P&P. This £5 will be credited against any future order of Metallike Emerald Porcelain.
| Product Details | |
| Box Size | 120cm x 60cm: 2tiles/1.44sqm per box | 120cm x 120cm: 2tiles/2.88sqm per box |
| Box Weight | 120x60: 28.8kg per box | 120x120: 57.6kg per box |
| Boxes Per Pallet | 120x60: 30boxes (43.2sqm) per pallet | 120x120: 17boxes (49.86sqm) per DOUBLE pallet (due to the oversized nature of the 120x120 tiles delivery cost per pallet is doubled) |
| Technical | |
| Grade | Wall & Floor R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors |
| Installation Points | Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond. |
| Accessories | |
| Popular Grout Colours | Ardex FS Cast Iron |
| Recommended Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc |
| Recommended Adhesive | EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane. |
