KERBSIDE DELIVERY IMPORTANT INFORMATION (PDF)
Product Details | |
Material | Limestone |
Finish | 4cm/3cm/2cm Indoor Step: Hand-honed front bullnose edge, sawn rear & sides, light brushed surface | 5cm Step: Hand-honed front bullnose edge, sawn rear & sides, external grip surface |
Weight | 4cm Step: 55kg / 3cm 39kg / 2cm 25kg per step | 5cm Step: 55kg per step |
Indoor Step Tread | Unlike flagstones, Indoor Step Treads are sold per piece. Our indoor Avignon step tread is 100cm long with one length finished in a bullnose (rounded) edge, the step is 45cm deep (front to back) and is either 4cm, 3cm or 2cm thick. The surface finish is the same as the internal flagstones i.e. light brushed surface |
Indoor Outdoor Step Tread | Unlike flagstones, Step Treads are sold per piece. Our indoor/outdoor Avignon step tread is 100cm long with one length finished in a bullnose (rounded) edge, the step is 35cm deep (front to back) and is 5cm thick. Our step treads can be used internally and externally and are often used as coping stones too. The surface finish is the same as the external flagstone i.e. high-grip external grade surface |
Technical | |
Suitability | 4cm/3cm/2cm Step: Indoor | 5cm Step: Indoor & Outdoor |
Internal Installation Points | These 40mm/30mm/20mm thick stone steps can be laid directly onto a concrete/screed base. When installing onto concrete/screed a good quality flexible grade white tile adhesive can be used. |
External Installation Points | These 50mm thick stone step so can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. NB: white Portland cement must be used in place of standard grey cement. If installing onto concrete/screed a good quality external grade white tile adhesive can be used. |
Accessories | |
Recommended Sealer | INDOORS: Rocatex Natural Finish Sealer or Lithofin MN Stainstop | OUTDOORS: Rocatex Paving & Stone Patio Sealer |