Quiet Stone Porcelain
From £34.80 / M2
(Sold per box and has a minimum quantity of 7 boxes)
0 Boxes
(Total coverage: 0 sqm)Select Sample Size
*ORDER up to 4 small samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
BOTH TILE SIZES NOW JUST £29sqm+VAT TO CLEAR! 60cm x 30cm WAS £35 & 120cm x 60cm WAS £45!
This collection of contemporary Slate effect porcelain has a wonderful soft appearance elevated by the sensitive reproduction of the typical fluid movement and textures found in real Slate. Choose from 3 charming colours; go add the warmth of restful Ivory to your space - a welcoming palette to build a warm and airy living space upon. This popular pale shade is complimented by 2 darker shades; Mud is based on the traditional soft charcoal grey slate quarried in Brazil - a delightful material unfortunately prone to scratching but reproduced here in a tough, scratch-proof porcelain tile! Mink is a wonderful warm coloured soft taupey grey tile that certainly adds an extra colour dimension to this range of contemporary stone look porcelain. A delightful tile that looks simply stunning in large 120cm x 60cm slabs in any open plan living space.
All 3 colours are available in the two most popular tile sizes used in interiors: 60x30 and 120x60. At just £29sqm+VAT for the popular 60x30 format and £29sqm+VAT for the 120cm long slab, this is a fantastically priced collection of high quality Italian porcelain.
We operate a minimum order of 7boxes on this clearance product. Box sizes are listed under the specification tab.
PRICES EXCLUDE DELIVERY and the price per sqm is also shown allowing easy comparison. Pack sizes are listed under the specification tab along with further information on this stone look porcelain floor.
KERBSIDE DELIVERY IMPORTANT INFORMATION (PDF)
Product Details | |
Box Size | 60cm x 30cm: 5tiles/0.9sqm per box | 120cm x 60cm: 2tiles/1.44sqm per box |
Box Weight | 60x30: 19.3kg per box | 120x60: 31kg per box |
Boxes Per Pallet | 60x30: 48boxes (43.2sqm) per pallet | 120x60: 30boxes (43.2sqm) per pallet |
Technical | |
Grade | Wall & Floor R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors |
Installation Points | Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond. |
Blending | Shade and colour variation should be expected in our ‘natural’ look porcelain products. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. A good number of packs should be opened at a time and blended. |
Accessories | |
Popular Grout Colours | WHITE: Rocatex Ultimate Silver Grey - Limestone - Cement Grey - Ardex FS Fresh Snowdrop - Dove Grey | IVORY: Rocatex Ultimate Almond - Jasmine - Ardex FS Classic Vanilla - Floating Driftwood | MINK & MUD: Rocatex Ultimate Cement Grey - Anthracite - Ardex FS Dove Grey- Silver Shimmer - Cast Iron |
Recommended Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc |
Anti-Slip Option 10mm | An R11 Anti-Slip 10mm thick option is available to order in 60cm x 30cm & 60cm x 60cm. If used outdoors these must be installed on a solid concrete/screed base. Lead times apply. A minimum order quantity of 43.2sqm applies on both options. |
Recommended Adhesive | EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane. |