Your shopping cart is empty!
Chateau Cenere Porcelain
Product Code: P/CHATC
Availability: In Stock
Chateau Cenere Porcelain
Chateau Cenere Porcelain
From £46.80 / M2
(Sold per box and has a minimum quantity of 5 boxes)
0 Boxes
(Total coverage: 0 sqm)
£54.00
£76.80 /boxesinc VAT
Select Sample Size
*ORDER up to 4 small samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
A beautiful ash grey coloured porcelain based on antiqued French limestone. Chateau Cenere is a large 90cm x 60cm flagstone look porcelain tile finished with a lovely pillowed edge (gently cushioned). With high chromatic variation, a subtle texture to the face of the tile and very gentle vein highlights through the slabs all combine to produce an authentic looking flagstone floor from stain-proof, hard-wearing Italian porcelain. Cenere is a fabulous fusion of various shades of greys, blues and pale greige (grey-beige). Chateau Cenere creates a fantastic kitchen or large open plan living floor that is easy to clean and is extremely low maintenance. A dedicated 20mm external option is available in the same tile size of 90cm x 60cm.
Chateau Cenere indoor stone effect porcelain offers exceptional value for money now reduced to £39sqm+VAT and delivery. These are high grade, Italian porcelain tiles, immensely durable and stain-proof.
Tile formats available:
- Standard R10 10mm thick internal format: Our hugely popular internal tile for use in both residential and commercial interiors, finished with a gently pillowed aged edge. Minimum order quantity (MOQ): 5boxes (8.205sqm) – USUALLY AVAILABLE FROM STOCK.
- Dedicated R11 20mm thick external format: The dedicated 20mm external tile format in Chateau Cenere is available with an undulating aged edge in the same size as its internal counterpart. Being a dedicated outdoor tile, this can be installed onto standard patio base or via a dry raised/floating installation using fixed or self-levelling pedestals. MOQ is 10boxes (5.472sqm) – USUALLY AVAILABLE FROM STOCK.
Specific installation guidelines for both options can be found under the specification tab.
PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order of 5 boxes (8.205sqm) on the internal format. Each pack contains 3 tiles equalling 1.641sqm. For popular grout colours and further information on this flagstone look porcelain please refer to the specification tab.
LARGE SIZE SAMPLE INFORMATION: A single 30cm x 30cm sample is available to purchase at £5inc P&P. Please confirm if you would like the indoor or outdoor format in the instructions at checkout box. This £5 will be credited against any future order of Chateau Cenere Porcelain.
PLEASE SCROLL DOWN FOR GALLERY IMAGES OF THIS SUPER PORCELAIN FLOOR
| Product Details | |
| Box Size | INDOOR: 3tiles / 1.641sqm per box | 20mm EXTERNAL FORMAT: 1tile / 0.5472sqm per box |
| Box Weight | INDOOR: 36.5kg per box | OUTDOOR: 24kg per box |
| Boxes Per Pallet | INDOOR: 26 boxes (42.666sqm) per pallet | OUTDOOR: 40boxes (21.888sqm) per pallet - based on network palletways delivery |
| Technical | |
| Grade Internal Format | Wall & Floor R10 - Residential interior floors | Commercial interior floors |
| Installation Points | Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond. |
| Grade 20mm External Format | Outdoor / Rectified - R11 - Residential exterior | Commercial interior & exterior |
| External Installation Points | External formats are 20mm thick so can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self-levelling pedestals. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR & SBR mixed with powdered to cement to form a bonding slurry used to prime the backs of the impervious tiles to provide a key for bonding. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used. Tiles can either be grouted with a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout), or finished with a brush-in resin compound or alternative jointing method. |
| Blending | Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended. |
| Accessories | |
| Popular Grout Colours | Ardex FS Dove Grey - Silver Shimmer | Rocatex Ultimate Cement Grey - Limestone - Silver Grey |
| Recommended Adhesive | EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane. |
| Recommended Grout Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc |
| External Anti-Slip Option 20mm | An External R11 Anti-Slip 20mm thick option is available to order. Tile size is 90.6cm x 60.4cm x 2.0cm. This can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self-levelling pedestals. |
